Menu
Cart 0
Havok Engineering V1 V2 WRX Spec 2 ECU Upgrade Chip – Launch Control / Overheat Protection - 18 PSI

Havok Engineering V1 V2 WRX Spec 2 ECU Upgrade Chip – Launch Control / Overheat Protection - 18 PSI

  • $12400


The Real Deal - Havok Engineering Spec 2 tuned ECU upgrade for the Version 1 and Version 2 Subaru Impreza WRX or STi. Designed to fit in the factory ECU, these replace the stock chip with performance settings, and add a few extra features.

Features:

  • Performance tuned fuel and ignition maps
  • Launch control code added, and set to 5000 rpm. This can be adjusted upon request.
  • The 180 km/h speed cut has been removed.
  • The rev limiter has been raised to 7600 rpm. This can be adjusted upon request.
  • The boost cut has been removed.
  • Adjusted wastegate and boost targeted to 18 psi. No Boost controller is needed.
  • A 3000 rpm rev limiter is activated if the ECU detects engine temps over 100º C.

This EPROM chip has been tuned for a stock to mildly modded car. Ideally you will have:

  • Upgraded fuel pump.
  • Free flowing exhaust (Cat-Back is fine).
  • Free flowing intake system.

 What to expect:

  • Increase in mid-range performance.
  • Mild pops and bangs from the exhaust.
  • Significant increase in Launch performance. The car will start to build boost while you are launching, and with the launch control feature your launches will be more consistent. 

What’s included:

  • Performance tuned EEPROM chip.
  • Installation socket.

Notes:

  • The speed sensor wire must be intact for the launch control to work.
  • Soldering and desoldering is required for installation.
  • There is no extra wiring or hookup needed for the launch control. It works off extra code that is added into the chip.

We Also Recommend