Havok Engineering ECU Reflash Service - EVO 5, 6 or 6.5 Running a factory ECU - POPS AND BANGS!
The Real Deal - This is for a reflash service for your EVO V, VI,or TME.
You send us your EVO V , VI, or TME ECU, and we will reflash it with our popular tune, and send it back next day.
The ECU will not been locked in any way, and can be retuned using open source software.
This tune has been modified for a whopping 1.5 bar (22 psi) of boost!
Negative timing has been mapped in to create "Pops and Bangs". You MUST have the SAS installed for this to work.
Launch control code will been added, and has been set at 5300 rpm. This can be altered upon request.
There is no additional wiring or modifications needed for launch control. It is a software addition to the ECU. (The speed sensor on the car must be working and intact).
The 180 km/h speed cut will be eliminated.
The annoying boost cut will be removed.
The rev limiter will be adjusted to 7800 rpm. This can be altered upon request.
In many cases this can help to recover a "bricked" ECU after a bad flash. Please enquire before purchase.
We also do these for the Evolution 1 - 3, 4, and 7.
Required:
- The factory SAS valve installed..
- The Banjo Bolts on the manifold should be drilled out to 6mm.
- EVO 560cc injectors.
- For 1.6 bar of boost, a fuel pump upgrade is recommended.
- Premium petrol / gasoline.
We Also Recommend